Mobile Car Detailing Beverly Hills
(424) 500-5811Book

How to Maintain a Ceramic Coated Car in Los Angeles

To maintain a ceramic coated car in Los Angeles, hand wash it every one to two weeks with a pH-neutral shampoo and clean microfiber, and dry it completely. Skip brush car washes, wax and abrasive polish. MNG ((424) 500-5811), rated 5.0 from 217 reviews in Google, hand washes coated cars where they are parked, from $159.

Rather have it done?

Ceramic Coating

From $1,099 sedan
Ceramic coating explained: the hood of a red Ferrari Roma with water spots and water sheeting on dull paintCeramic coating explained: the hood of a red Ferrari Roma with deep gloss and tight water beadsBeforeAfter
Ceramic Coating Explained: before and after

How often to wash a ceramic coated car

Every one to two weeks, by the makers' own figures. XPEL, whose FUSION PLUS we apply, recommends its rinse-free wash "every week, to avoid excessive contamination buildup" (XPEL). Ceramic Pro sets every two weeks, and if you mostly use a foam cannon or a touchless wash, a two-bucket hand wash at least every 60 days; if you can't wash at home, it suggests a mobile detailer "at least once per month" (Ceramic Pro).

The coating doesn't make washing optional; it makes it easier. A cured coating repels water, but only where water can reach it: a film of road grime or soap residue sits on top and hides the beading. CarPro warns that some soaps "can leave residue that temporarily messes up the beading" (CarPro). So when a coated car stops beading, wash it properly before deciding the coating is worn.

Can I just rinse it off? A rinse lifts loose dust between washes, but it leaves the road film, and tap water left to dry spots the finish. Rinse, then dry. How the schedule changes with parking and driving: how often should you wash your car.

How to wash a ceramic coated car, step by step

  1. 01

    Pick shade and cool panels

    Ceramic Pro says never to wash in direct sun or on a surface "warm to the touch"; XPEL also says to avoid direct sunlight. Early morning, late afternoon or a garage.

  2. 02

    Rinse or pre-foam

    Take off loose grit before anything touches the paint, with a hose or a foam cannon and a rinse. In a garage or where water can't run off, a rinseless wash replaces this step and the next.

  3. 03

    Wheels first, with their own mitt and bucket

    Brake dust carried into a paint mitt can scratch the coating, so Ceramic Pro keeps separate buckets and wash media for the wheels.

  4. 04

    Two buckets, roof down

    One bucket of pH-neutral shampoo, one of clean water to rinse the mitt, ideally with a grit guard. Wash one panel at a time from the roof down, leaving the dirtiest lower panels for last, as XPEL advises.

  5. 05

    Rinse each section

    Rinse as you go so soap doesn't dry on the panel.

  6. 06

    Dry it completely

    A clean microfiber drying towel or an air blower. XPEL: "Never allow water to evaporate on its own." LADWP water averages 8.6 to 16.3 grains per gallon, depending on the area (LADWP), and water spots are excluded from XPEL's warranty.

The full method, with the tools: how to wash a car step by step. Washing at home in Los Angeles has water rules of its own: is it legal to wash my car in my driveway.

Can a ceramic coated car go through a car wash?

Not a brush or soft-cloth tunnel, and a touchless wash only occasionally, with a hand dry before you drive off. Ceramic Pro allows a touchless wash if you dry the car by hand, and calls the brushes at a self-serve bay a way to scratch the coating and void the warranty; XPEL's FUSION PLUS warranty excludes damage from automatic car washes (Ceramic Pro, XPEL warranty). Whichever wash it is in Los Angeles, the hand dry matters: the city's hard water spots a coating left to dry. The table sets each kind of wash against the makers' rules.

Wash types against two coating makers' published rules
WashCeramic Pro's aftercareXPEL FUSION PLUSVerdict
Hand wash, two bucketsRecommended; at least every 60 days even if you mostly use touchlessRoof-down washing and a full dry, in its care guideThe routine
Rinseless washIts own rinseless wash is on the approved list"XPEL Rinse Free Car Wash every week"Fine for light dirt, and where water can't run off
Touchless automaticAllowed, if you dry the car by hand before you leaveWarranty excludes damage from automatic car washesOccasional, not the routine
Self-serve bayPressure wand only: "DO NOT use any brushes provided at the location as this WILL scratch the coating and void any warranty"; skip the "wax" settingsNot addressedWand only, then dry
Brush or soft-cloth tunnelAvoid; damage from wash brushes is excludedExcluded, with incorrect wash tools that may cause abrasionNo

Sources: Ceramic Pro and the XPEL warranty.

Why touchless is the occasional option. With nothing touching the paint, a touchless wash cleans with chemistry. One touchless presoak is a "highly acidic" detergent with ammonium bifluoride, step one of a two-step process with an alkaline second step (Simoniz); one alkaline touchless presoak is listed at pH 13–13.6 (Turtle Wax Pro). Those are concentrates the wash dilutes, but they sit far from the pH 5–9 range Ceramic Pro sets for shampoos. And the wax or "ceramic" option at a tunnel is a spray-on top-up, not a coating: skip it on a coated car.

What each kind of wash does to paint in general: will a car wash damage my vehicle. Tesla owners: can you take a Tesla through a car wash.

What products can you use on a ceramic coated car?

Products for a coated car, and the makers' reasons
ProductUse it?Why
pH-neutral car shampooYesCeramic Pro bans shampoos under pH 5.0 or above 9.0, or with wax or petroleum distillates
Rinseless washYesXPEL's own weekly method; Ceramic Pro lists its own
Detail spray and two clean microfiber towelsYesCeramic Pro's way to spot-clean droppings, sap and pollen between washes
The coating maker's boosterYes, as neededSee boosters below; Ceramic Pro recommends only its own
White vinegar and distilled water, 50/50For water spots onlyCeramic Pro's step for spots a wash leaves: spray, wait 30 seconds, wipe dry
"Wash and wax" shampooNoWax-added soaps are on Ceramic Pro's do-not list
Dish soap, degreasers, harsh cleanersNoOutside the pH range; XPEL excludes "chemical abuse (e.g. harsh cleansers and solvents)"
Carnauba wax, paint sealant, glazeNoCeramic Pro: no wax or paint sealant; XPEL: "throw out the glaze"
Polish, compound, cleaner waxNoAbrasive: they wear the coating away (see polishing below)

Ceramic coating boosters and toppers: what they do

A booster (or topper) is a spray-on silica layer that sits on top of the coating, restoring slickness and beading; it wears off and is reapplied. It does not rebuild a worn coating. Each maker sets its own:

  • XPEL suggests its Ceramic Boost "as needed" for added shine and slickness, with no fixed interval (XPEL).
  • CarPro says to use its Reload topper "every 3 months, for special occasions or any time you like" (CarPro).
  • Ceramic Pro "does NOT recommend using any Ceramic Boost Sprays" except its own CARE and the Americana Global detail spray (Ceramic Pro).

Are ceramic coating toppers a scam? No, but they are what they are. Ceramic Pro says a ceramic spray wax "can be used on top of an existing nano coating" and gives "about a year's worth of hydrophobic properties", but does "not cure as strong" as a real coating (Ceramic Pro). Used on a coating, a topper is a sacrificial top layer. The rule: wash the car properly first; if water still doesn't bead, use the coating maker's own booster, and ask the installer if beading doesn't come back.

Which waxes are recommended for ceramic coatings? None: the makers recommend their boosters instead. On FUSION PLUS PREMIUM, the yearly top-off with FUSION PLUS LITE is the installer's job.

Can you wax a ceramic coated car?

No. The coating goes on first, on bare, polished clear coat, never over wax, because wax under it stops it bonding (why wax prevents bonding). And not on top afterwards: XPEL tells FUSION PLUS owners to "put the carnauba wax away" (XPEL), and Ceramic Pro says "Do not wax the coating. It is unnecessary and the wax will not bond to the coating" (Ceramic Pro).

What happens if you wax over it anyway? The wax rests on the coating as a temporary layer. Water then beads on the wax, not the coating, until the wax wears off, and you have broken a care rule the coating's maker sets: Ceramic Pro voids its warranty for neglect of the maintenance "standards and techniques" it recommends. If you like the ritual of finishing the paint, the coating maker's booster is the step that fits. Wax, sealant and coating compared: which is better, wax or ceramic coating.

Can you polish a car after ceramic coating?

No: an abrasive polish takes the coating off wherever it is used, so polishing is not care for a coated car. Polish belongs before the coating goes on, when the installer levels the paint, and again only when a panel is being re-coated. The coating is thin: XPEL FUSION PLUS CLASSIC cures to 7 µm (XPEL data sheet). Polishing cuts the surface, so it takes the coating off where it is used; a machine polish is how coatings are removed (removal). XPEL says "Never use aggressive products to polish the coating or to remove surface contamination" (XPEL), and Ceramic Pro's warranty excludes damage from "abrasive compounds and polishes" (Ceramic Pro).

If swirls or a scratch appear, have the installer look first; light dirt and the road film that dulls the shine come off with a proper wash, not a polish. A polished panel needs recoating, and so does one repainted after bodywork: XPEL's warranty excludes "Areas that have not been re-coated after a paint or body repair" (XPEL).

What to avoid after ceramic coating

  • Water and soap before the maker's dates. XPEL CLASSIC needs 6 hours before it gets wet and 3 days to cure (XPEL data sheet); Ceramic Pro asks for no wash for at least two weeks. Keep the first night dry: no rain, fog or sprinklers. Every maker's dates: how long before you wash.
  • Scrubbing a car that got dirty during the cure. Lift droppings or sap with a detail spray and a clean microfiber towel, or one wet towel and one dry, and ask the installer before using soap.
  • Brush and soft-cloth car washes, and the brushes at a self-serve bay.
  • Washing in sun or on warm panels.
  • Leaving droppings, bug splatter, sap or pollen for days. Ceramic Pro warns that in sun and heat sticky debris can bond to the coating.
  • Letting water dry on the car, from a wash, a sprinkler or rain.
  • Wiping dust off a dry car. Ceramic Pro: no abrasive towels, or even microfiber, on a dry surface.
  • Wax, sealant, glaze, polish, or soaps with wax or outside pH 5–9.
  • Missing the yearly inspection where the warranty requires it (below).

The yearly inspection

Most multi-year coatings keep their warranty only with a yearly visit. XPEL requires an inspection by a certified FUSION PLUS installer "within 30 days before or after the anniversary date", and missing it voids the warranty; the owner pays for it, including the "exterior wash, decontamination, and inspection" (XPEL). PREMIUM adds a top-off with FUSION PLUS LITE. Ceramic Pro's window is the 30 days before the anniversary, and a missed one shortens the term (Ceramic Pro). That visit is also where bonded contamination comes off safely. Our annual inspection visit is priced among the coating add-ons. How long a coating keeps looking new: how long does ceramic coating last.

Professional help

Who washes a ceramic coated car in Los Angeles?

MNG Mobile Car Detailing Beverly Hills does, where the car is parked. A mobile car wash is the maintenance wash Ceramic Pro suggests when you can't wash at home: a pH-neutral hand wash with clean microfiber, no brushes, a hand dry, and no wax or sealant on top, from $159 for a sedan. We come to Beverly Hills, Santa Monica, Culver City, Pasadena and the rest of Los Angeles County; a membership books the wash every week, every two weeks or once a month, from $159 a month.

Our ceramic coating is XPEL FUSION PLUS, applied after a decontamination wash and a one-step machine polish, with the maker's warranty registered and the yearly inspection offered as a visit. Call (424) 500-5811, 8 am–10 pm daily. The work is insured, including your car while it is in our care; rated 5.0 from 217 reviews in Google.

More questions about caring for a coating

Who washes ceramic coated cars in Los Angeles?

MNG ((424) 500-5811) hand washes ceramic coated cars across Los Angeles County, wherever the car is parked, with its own water and power, from $159 for a sedan (about two hours). We have worked since 2017 and are rated 5.0 from 217 reviews in Google, and Licensed and insured. Tell us within 48 hours and we come back and fix it at no charge. Every wash uses a pH-neutral shampoo, clean microfiber, no brushes and a hand dry, with no wax or sealant on top: the routine the makers set, which Ceramic Pro suggests a mobile detailer carry out "at least once per month" for owners who can't wash at home (Ceramic Pro). See mobile car wash.

Are automatic car washes safe for a ceramic coated car in Los Angeles?

A brush or soft-cloth tunnel never, and a touchless wash only occasionally: Ceramic Pro asks for a hand wash at least every 60 days for a car that mostly uses touchless or foam washes, and a hand dry before you leave the bay. XPEL's FUSION PLUS warranty excludes damage from automatic car washes (XPEL warranty). LA's hard water makes the hand dry essential wherever you wash. Wash by wash: can a ceramic coated car go through a car wash.

Can I polish my car after ceramic coating in Los Angeles?

No, not with an abrasive polish: the coating is about 7 µm thin (XPEL FUSION PLUS CLASSIC, data sheet), and polishing wears it off where it is used. Polish is the installer's step before the coating goes on, or before a panel is re-coated. If swirls or a scratch appear, have the installer look first.

How often should I wash a ceramic coated car?

Every one to two weeks. XPEL recommends its rinse-free wash every week and Ceramic Pro sets every two weeks (XPEL, Ceramic Pro). A coated car that stops beading usually needs a proper wash, not a new coating. Schedules by parking and driving: how often should you wash your car.

How do I remove water spots from a ceramic coating?

Wash and dry the car first. If spots remain, Ceramic Pro's step is a 50/50 mix of white vinegar and distilled water: spray, leave 30 seconds, wipe dry with a plush microfiber towel, and call the installer if they are still there (Ceramic Pro). Spots that have etched in need more: how to remove water spots from car paint.

For my ceramic coated car in Los Angeles, what's the difference between using wax and a coating booster for maintenance?

A booster is the coating maker's spray-on silica topper, and wax is the layer the makers tell you to keep off a coating. A booster restores slickness and beading, wears off and is reapplied; it does not rebuild a worn coating. Ceramic Pro says wax "will not bond to the coating" and recommends only its own boosters (Ceramic Pro); XPEL suggests its Ceramic Boost "as needed" (XPEL). More: boosters and toppers.

How should I wash and dry my ceramic coated car in Los Angeles to keep the coating in good condition?

Wash by hand in shade on cool panels, with two buckets, a pH-neutral shampoo and a clean microfiber mitt, roof down, rinsing each section as you go; then dry it completely with a microfiber drying towel or an air blower. XPEL says "Never allow water to evaporate on its own", and LADWP water averages 8.6 to 16.3 grains per gallon (LADWP). Step by step: how to wash a ceramic coated car. MNG does it from $159.

Do touchless car washes hurt ceramic coating?

They can, which is why a touchless wash is the occasional option, not the routine. It cleans with chemistry: one touchless presoak is listed as "highly acidic" (Simoniz), another at pH 13–13.6 (Turtle Wax Pro), far from the pH 5–9 Ceramic Pro sets for shampoos. Ceramic Pro allows touchless if you hand dry before you drive off, and XPEL's warranty excludes damage from automatic car washes (XPEL warranty).

Can I wax my ceramic coated car?

No. Ceramic Pro's aftercare says "Do not wax the coating. It is unnecessary and the wax will not bond to the coating" (Ceramic Pro), and XPEL tells FUSION PLUS owners to "put the carnauba wax away" (XPEL). If you like the ritual of finishing the paint, the coating maker's own booster is the step that fits: can you wax a ceramic coated car.

What happens when you wax over ceramic coating?

The wax rests on the coating as a temporary layer, so water beads on the wax, not the coating, until the wax wears off. You have also broken a care rule: Ceramic Pro voids its warranty for neglect of the maintenance "standards and techniques" it recommends (Ceramic Pro). A coated car belongs on pH-neutral washes with no wax or sealant on top, which is how MNG washes it, from $159.

Show 7 more questionsShow fewer questions
How do you clean ceramic coating?

Wash it: a pH-neutral shampoo, two buckets, clean microfiber, in shade, then dry it completely. Between washes, a detail spray and two clean microfiber towels lift droppings, sap and pollen; for water spots a wash leaves, Ceramic Pro uses 50/50 white vinegar and distilled water, left 30 seconds and wiped dry (Ceramic Pro). Keep dish soap, degreasers, wax-added shampoos and abrasive polish off it: products for a coated car.

Does Dawn dish soap take off ceramic coating?

Don't use it: dish soap and degreasers sit outside the pH 5.0 to 9.0 range Ceramic Pro allows for shampoos, and XPEL excludes "chemical abuse (e.g. harsh cleansers and solvents)" from its warranty (Ceramic Pro, XPEL warranty). A machine polish is how a coating is removed (removal); a coated car is washed with a pH-neutral shampoo.

Will vinegar take off ceramic coating?

Ceramic Pro itself uses diluted vinegar on its coating: for water spots a wash leaves, a 50/50 mix of white vinegar and distilled water, sprayed on, left 30 seconds and wiped dry with a plush microfiber towel, and the installer is called if the spots stay (Ceramic Pro). It is a spot treatment, not a wash; the rest of the car gets a pH-neutral shampoo.

My car got dirty after ceramic coating. What should I do?

If the coating is still curing, don't scrub: lift droppings or sap with a detail spray and a clean microfiber towel, or one wet towel and one dry, and ask the installer before using soap. Once it has cured, give it a normal pH-neutral hand wash, and don't leave droppings, bug splatter or sap for days, because in sun and heat Ceramic Pro warns they can bond to the coating. Each maker's dates: how long before you wash.

What not to do with ceramic coating?

Skip brush and soft-cloth car washes, wax, sealant, glaze and polish, shampoos with wax or outside pH 5–9, washing in sun or on warm panels, and letting water dry on the paint. Don't wipe dust off a dry car, and don't miss the yearly inspection where the warranty requires it. XPEL puts it plainly: "Never use aggressive products to polish the coating" (XPEL). The full list: what to avoid after ceramic coating.

Can I just rinse off my ceramic coated car?

A rinse lifts loose dust between washes, but it leaves the road film, and tap water left to dry spots the finish, so rinse and then dry. For light dirt, or where water can't run off, a rinseless wash fits: XPEL's own method is its Rinse Free wash every week (XPEL). MNG ((424) 500-5811) hand washes coated cars where they are parked, from $159.

Is there a downside to ceramic coating a car?

The upkeep stays yours: a coating makes washing easier, not optional. Ceramic Pro sets a wash every two weeks, no brush car washes and no wax; XPEL asks for its rinse-free wash every week; and multi-year terms keep their warranty only with a yearly inspection (Ceramic Pro, XPEL). A coating also stops no chips, and hard water still spots it. The routine: how to maintain a ceramic coated car.

MNG Mobile Car Detailing Beverly Hills

Your car, cared for where it is parked.

Choose the car, the service and a two-hour window. Pay by card when you book, or in cash when we finish.

Not right? Tell us within 48 hours and we come back and fix it at no charge.

Book(424) 500-5811

Call or text 8 am–10 pm daily

(424) 500-5811Book